- 3DEC
3DEC (3-Dimensional Distinct Element Code) is the three-dimensional extension of Itasca's two-dimensional code UDEC. It is specifically designed for simulating either the quasi-static or dynamic response to loading of rock media containing multiple, intersecting joint structures.
http://www.itascacg.com/3dec.html
(Added: Sun Aug 22 2004Hits: 55) - Examine2D
Examine2D is a very fast two-dimensional indirect boundary element and displacement discontinuity program for calculating stresses and displacements around underground and surface excavations in rock.
http://www.rocscience.com/products/Examine2D.asp
(Added: Sun Aug 22 2004Hits: 44) - Examine3D
Examine3D is an engineering analysis program for underground excavations in rock. Examine 3D was developed mainly for stress analysis, although its data visualization tools can be applied to a wide range of three-dimensional mining and civil engineering data.
http://www.rocscience.com/products/Examine3D.asp
(Added: Sun Aug 22 2004Hits: 49) - ExamineTab
ExamineTAB is a three-dimensional displacement discontinuity program for calculating elastic stresses and displacements within tabular ore bodies due to staging of excavations. All excavations must lie on the same plane and be of the same height.
http://www.rocscience.com/products/ExamineTab.asp
(Added: Sun Aug 22 2004Hits: 41) - FLAC
FLAC (Fast Lagrangian Analysis of Continua) is a powerful two-dimensional continuum code for modeling soil, rock and structural behavior.
http://www.itascacg.com/
(Added: Sun Aug 22 2004Hits: 53) - FLAC/Slope
FLAC/Slope uses the graphical interface and the automatic factor-of-safety calculation of FLAC as the core of a new, user-friendly code that models slope stability problems under a wide variety of slope conditions.
http://www.itascacg.com/flacslope.html
(Added: Sun Aug 22 2004Hits: 35) - FLAC3D
FLAC3D is a continuum code that is used in analysis, testing, and design by geotechnical, civil, and mining engineers. FLAC3D has a large range of application because its analytical potential is not limited to a particular problem definition or type of analysis.
http://www.itascacg.com/flac3d.html
(Added: Sun Aug 22 2004Hits: 50) - MAP3D
Map3D is a full three-dimensional stress analysis program designed for the stability analysis of underground (mining, tunnels, caverns) and surface excavations (open pits, quarries, slopes).
http://www.map3d.com/
(Added: Sun Aug 22 2004Hits: 53) - Phase2
Phase2 is a 2D plastic finite element program for calculating stresses and displacements around underground or surface excavations. It can be used for a wide range of engineering projects, including complex tunneling problems in weak rock, underground powerhouse caverns, surface excavations such as open pit mines, and slopes in rock or soil.
http://www.rocscience.com/products/Phase2.asp
(Added: Sun Aug 22 2004Hits: 49) - SAGE-CRISP2D
CRISP has been extensively used worldwide by both the research and the industrial communities for many geotechnical problems, including retaining structures, embankments, tunnels and foundations. It has also been used in the analysis of footings, pile foundations, geotextile reinforcement, soil nailing, effect of anisotropy, slope stability, borehole stability and construction sequence studies.
http://www.mycrisp.com/products/sagecrisp2d.html
(Added: Sun Aug 22 2004Hits: 38) - UDEC
UDEC (Universal Distinct Element Code) is well suited for problems involving jointed rock systems or assemblages of discrete blocks subjected to quasi-static or dynamic conditions.
http://www.itascacg.com/udec.html
(Added: Sun Aug 22 2004Hits: 42) |
