| Technical Papers | |||||||||||||||||
|
|||||||||||||||||
| Grinding |
 Metallurgist's Toolbox - Comminution |
| Title | Author(s) | Date |
| Autogenous and Semi-Autogenous Grinding Circuits: A Means of Predicting the Effects of Ore type on Downstream Processes | Derek Barratt,Brad Matthews | |
| Maintaining Ring Gears in Ball Mills | David Kress | 02/00 |
| Systems approach to grinding improvements at the Tilden concentrator | R.E. McIvor, T.P. Weldum, B.J. Mahoski and R.S. Rasmussen | 02/00
|
| QUALITATIVE MODELING OF A SEMI-AUTOGENOUS GRINDING CIRCUIT AT HIGHLAND VALLEY COPPER (HVC) MINE | Edgardo I. CHILVIET; John A. MEECH; Andrew L. MULAR; Hans RAABE; John MITCHELL | |
| Design Aspects of Large Ball Mills | John Hadaway, John Alden. Stephen Hall | 11/98 |
| The Effect Of Lifter Design On Alumbrera's SAG Mill Performance: Design Expectations and Optimization. | Mark Sherman, Dr. Raj Rajamani | |
| Laboratory studies in comminution- Part III- Effect of mill parameters on grinding a tin ore | ||
| Laboratory studies in comminution- Part IV- Effect of feed sizing on the grinding of a tin ore | ||